VM740ML Moving Magnet Cartridge

The VM740ML is a top-end model fitted with the die-cast aluminium alloy housing. The body reduces unwanted vibration and enhances the superior sound quality of high-performance line contact styli.

Micro Line Contact styli Having a greater tracking ability than an elliptical stylus, the line contact styli will have a deeper contact area to the vinyl record groove. This enables the stylus to fully reproduce all content of the vinyl record with reduced stylus and groove wear.

VMCartridge structure

Audio-Technica’s high performance para-toroidal coil structure is inherited in this new VM generation.

Toroidal ring coils are separated by a centre magnetic shield for complete electrical channel separation. As a result, the new Dual Moving Magnet cartridge series offers audiophiles a delicate-yet-stable sound performance at affordable price positions - a blend that continues to allow Audio-Technica products to be favoured for high-fidelity sound.

Accessories

• Cartridge installation screws
  5mm×2 and 10mm×2
• Washer×2
• Hexagon nut×2
• Non-magnetic screwdriver×1
• Brush×1
• Lead wire set ×1

Specifications

• Frequency response: 20 to 27,000Hz
• Output voltage: 4.0mV (1kHz, 5cm/sec.)
• Channel separation: 28dB (1kHz)
• Output balance: 1.0dB (1kHz)
• Tracking force: 1.8 to 2.2g (2.0g standard)
• Coil impedance: 2.7k ohms (1kHz)
• DC resistance: 800 ohms
• Load impedance: 47k ohms
• Load capacitance: 100 to 200pF
• Coil inductance: 460mH (1kHz)
• Static compliance: 40×10 -6 cm/dyne
• Dynamic compliance: 10×10 -6 cm/dyne (100Hz)
• Stylus: NudeMicroLine™(2.2×0.12mil)
• Cantilever: Aluminium tapered pipe
• Vertical tracking angle: 23°
• Dimensions (HWD): 17.3×17.0×28.2mm