VMN95E Elliptical stylus assembly for VM95E

Calculate Shipping

Pickup from Esk QLD - $0.00 (ETA: 1 days)
Once you have placed your order please phone to make an appointment to collect.

THIS PRODUCT CODE IS FOR THE REPLACEMENT STYLUS ONLY

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

- VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
- Aluminium cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
- Compatible with any AT-VMN95 replacement stylus

SPECIFICATIONS

Frequency Response	20-22,000 Hz
Channel Separation	20 (dB at 1 kHz)
Vertical Tracking Force	1.8-2.2g (2.0g standard)
Stylus Construction	Bonded round shank
Recommended Load Impedance	47,000 ohms
Output	4.0 mV (1 kHz, 5 cm/sec.)
Channel Balance	2.0 dB (1 kHz)
Stylus Shape	0.3 x 0.7 mil elliptical
Cantilever	Aluminium pipe
Mount	Half-inch
Replacement Stylus	AT-VMN95E
Coil Impedance	3.3 k ohms (1 kHz)
DC Resistance	485 ohms
Load Capacitance	100 to 200 pF
Coil Inductance	550 mH (1 kHz)
Vertical Tracking Angle	23°
Dimensions	17.2mm H × 18.9mm W × 28.3mm D
Weight	6.1g
Accessories Included	Two 11mm installation screws, two 8mm installation screws, two washers

(VMN95E)

SKU	VMN95E
Brand	AUDIO TECHNICA
Shipping Weight	0.1000kg
Shipping Width	0.080m
Shipping Height	0.110m
Shipping Length	0.050m
Shipping Cubic	0.000440000m3